Pure Basic Pack

What the Basic Pure Pack allows:

• Filter water from impurities : sediments, algae, chlorine, heavy metals, etc.

• Soften water and significantly reduce the effects of limescale on your installations.

• Protect your equipment: water heaters, washing machines, dishwashers, taps, etc.

• Benefit from a solution without electricity and without salt, simple and economical to use.

• Obtain a very pure drinking water, filtered to 0.0001 µ, to reduce :

  • the pharmaceutical residues,

  • the PFAS,

  • the microplastics,

  • the pesticides,

  • and many other pollutants.

Pre-filter PMz :

• Membrane made of stainless steel 316L with drainage.
• Filtration at 40 µ.
• Role: to retain large particles (sediments, algae, etc.) to protect the subsequent stages and increase their lifespan.

Softener Module B + modules C :

• The Module B is placed on the main water supply circuit.

• It transforms limestone into aragonite, a non-scaling form.

• The modules C connect to the inlet :

  • of the water heater,

  • of the dishwasher,

  • of the washing machine,

  • and other appliances sensitive to limescale.

• Together, they allow for the removal of 93% of limescale in these devices, thus limiting scaling and extending their lifespan.

Performance and efficiency :

• 93% efficiency on limescale thanks to the combination of Module B and modules C.

• No electricity consumption, no salt addition for the general water treatment.

• Advanced filtration at 0.0001 µ for drinking water (Pure 800 reverse osmosis).

• Production ratio 2:1 : 2 litres of purified water for 1 litre of waste, one of the best on the market.

• Filter lifespan : on average 2 years for the reverse osmosis filters, depending on usage and water quality.

• Simple maintenance :

  • Monthly purge of the PMz pre-filter.

  • Change of the ACF filter of the FMz module every 50,000 L.

  • Periodic replacement of the PCT and RO filters of the osmosis according to recommendations.

FMz filtration module with ACF filter : 

• Filtration at 5 µ.

• Combines the technologies PP and KDF into a single filter.

• Uses activated carbon (ACF) to :

  • Reduce chlorine.

  • Trap heavy metals and other impurities.

• Result : cleaner, clearer and more pleasant water for all uses.

Pure 800 reverse osmosis : 

• Designed for drinking water (beverage, cooking).

• Filtration at 0.0001 µ, one of the finest on the consumer market.

• Strongly reduces :

  • the pharmaceutical residues,

  • the PFAS,

  • the microplastics,

  • the pesticides,

  • heavy metalsmétaux lourds,

  • the chlorine and its by-products.

• Ratio 2:1 : for 3 litres of treated water, 2 litres are retained and 1 litre is discharged, which is very efficient for reverse osmosis.

• Reduced footprint : compact design, easy to integrate under a sink or in a small technical room.

• Filter lifespan : approximately 2 years with average use, limiting the frequency and cost of maintenance.

For what use?

The Basic Pure Pack is ideal for:

• The houses that want both:

  • an improved general water (less limescale, fewer impurities),

  • and a very pure drinking water.

• Households concerned about their health and the quality of the water they drink and use for cooking.

• Users looking for a complete, sustainable and economical solution, without a traditional salt softener.